水泥与生石灰处理吹填土对比试验研究

吹填土是由水力吹填形成的,颗粒很细,固结性能差,吹填以后要经过很长时间才能自然沉积固结,待表面形成硬壳后方可进行加固处理,因此,缩短沉积固结时间,使吹填土尽快地从泥浆状态转变为具有一定承载力的地基,是亟待解决的问题。在室内进行模拟加固方法的沉降柱试验,对吹填土加添固化剂以加速其沉积固结。固化剂主要选用水泥和生石灰,对两种添加方式的机理及固结效果进行详尽的分析和研究,初步找出加固效果产生差异的原因,从而揭示其固化机理,为吹填土地基的加固提供一种更加经济可行的方法。     

有限厚度砂床对波浪载荷的响应

本文采用水-土两相介质混合物的连续介质力学理论分析了有限厚度砂床对波浪载荷的响应。土床看作饱和孔隙弹性介质,用Biot理论来描述流动和变形的耦合效应,波浪用线性水波描述。在上述假设下得到了描述土床对波浪载荷响应的基本方程。用解沂-数值方法给出了土床中位移、应力和孔隙水压力的分布并将理沦计算结果与波浪-砂床模型试验的实验资料进行了比较。文章还对影响土床对波浪响应的参量特性进行了分析和讨论。根据参量研究、理论计算与实验资料比较的结果,可以得出结论:本文所提供的理论模型和计算方法能用来估算海床对波浪载荷的影响。     

STRUCTURAL DAMAGE MODEL OF UNSATURATED EXPANSIVE SOIL AND ITS APPLICATION IN MULTI-FIELD COUPLE ANALYSIS ON EXPANSIVE SOIL SLOPE

Focused on the sensitivity to climate change and the special mechanical characteristics of undisturbed expansive soil, an elastc-plastic damage constitutive model was proposed based on the mechanics of unsaturated soil and the mechanics of damage. Undisturbed expansive soil was considered as a compound of non-damaged part and damaged part. The behavior of the non-damaged part was described using non-linear constitutive model of unsaturated soil. The property of the damaged part was described using a damage evolution equation and two yield surfaces, i.e., loading yield (LY) and shear yield (SY). Furthermore, a consolidation model for unsaturated undisturbed expansive soil was established and a FEM program named UESEPDC was designed. Numerical analysis on solid-liquid-gas tri-phases and multi-field couple problem was conducted for four stages and fields of stress, displacement, pore water pressure, pore air pressure, water content, suction, and the damage region as well as plastic region in an expansive soil slope were obtained.     

苏州阳澄湖地区淤泥质粘土工程地质特性探讨

苏州阳澄湖周围的沼积湖积平原存在一种性质较为特殊的淤泥质粘土,其亲水性粘土矿物含量和液塑限指标均较高,但在天然状态下虽具一定的胀缩性却未达到膨胀土的标准,可是经过扰动压实后,随着干密度的增大和含水量的减少却表现出较强的胀缩性,即转变为“人工膨胀土”[1]。本文通过苏州阳澄湖东北方向某一级公路附近3个取土场土样的试验分析,探讨了此地区这种淤泥质粘土的特殊性,为以后的工程施工提供了科学依据。     

力学可以为农业现代化作贡献

农业现代化提出了许多与力学各个分支都有密切关系的问题．从农田耕作、农业物料性质、农产品烘干、水果和蔬菜生产、农业生物环境、节水灌溉、农业水土资源合理利用和作物生长等方面，介绍了有关的力学问题和目前的研究进展．     

Electrochemical Detection of TNT at Cobalt Phthalocyanine Mediated Screen‐Printed Electrodes and Application to Detection of Airborne Vapours

We describe the use of cobalt phthalocyanine as a mediator to improve the sensitivity for the electrochemical detection of TNT. Commercial screen‐printed electrodes containing cobalt phthalocyanine were employed for determination of TNT. Improved sensitivities compared to screen‐printed carbon electrodes without phthalocyanine were observed, current response for cyclic voltammetric measurements at modified electrodes being at least double that of unmodified electrodes. A synergistic effect between oxygen and TNT reduction was also observed. Correlation between TNT concentrations and sensor output was observed between 0–200 µM TNT. Initial proof‐of‐concept experiments combining electrochemical determinations, with the use of an air‐sampling cyclone, are also reported.     

Two‐dimensional replica‐exchange method for predicting protein–ligand binding structures

We have developed a two‐dimensional replica‐exchange method for the prediction of protein–ligand binding structures. The first dimension is the umbrella sampling along the reaction coordinate, which is the distance between a protein binding pocket and a ligand. The second dimension is the solute tempering, in which the interaction between a ligand and a protein and water is weakened. The second dimension is introduced to make a ligand follow the umbrella potential more easily and enhance the binding events, which should improve the sampling efficiency. As test cases, we applied our method to two protein‐ligand complex systems (MDM2 and HSP 90‐alpha). Starting from the configuration in which the protein and the ligand are far away from each other in each system, our method predicted the ligand binding structures in excellent agreement with the experimental data from Protein Data Bank much faster with the improved sampling efficiency than the replica‐exchange umbrella sampling method that we have previously developed. © 2013 Wiley Periodicals, Inc.     

Physicochemical and Graph Theoretical Descriptors in Developmental Toxicity SAR: A Comparative Study

Abstract

Chemical insults to the developing fetus can lead to growth retardation, malformation, death, and functional deficits. The present study seeks to determine if physicochemical and/or graph theoretical parameters can be used to determine a structure-activity relationship (SAR) for developmental toxicity, and if consistency is observed among the selected features. The biological data utilized consists of a diverse series of compounds evaluated within the Chernoff-Kavlock in vivo mouse assay. Physicochemical parameters calculated correspond to electronic, steric, and transport properties. Graph theoretical parameters calculated include the simple, valence, and kappa indices. Both sets of parameters were independently applied to derive SARs in order to compare the quality of the respective models. Multiple random sampling, without replacement, was utilized to obtain ten training/test partitions. Models were built by linear discriminant analysis, decision trees, and neural networks respectively. Comparisons on identical sets of data were carried out to determine if any of the model building procedures had a significant advantage in terms of predictive performance. Furthermore, comparison of the features selected within and across the model building processes led to the determination of model consistency. Our results indicate that consistent features related to developmental toxicity are observed and that both physicochemical and graph theoretical parameters have equal utility.     

超声辅助提取/离子色谱法测定铬污染土壤中的六价铬

建立了超声辅助提取/离子色谱法测定铬污染场地中铬（Ⅵ）的方法。选用0.3 mol/L的KCl溶液作提取剂,对12组土壤样品中的铬（Ⅵ）进行超声辅助提取20 min。采用Metrosep A Supp 4-250（250 mm×4.0mm）型阴离子分离柱,以4 mmol/L Na₂CO₃-1 mmol/L NaHCO₃混合溶液为淋洗液对样品进行分离分析。铬（Ⅵ）在0.01²0 mg/L浓度范围有较好的线性关系,相关系数（r²）为0.999 8;该方法的检出限为0.003 mg/L,加标回收率为96.4%¹06.8%,相对标准偏差（RSD,n=3）为0.56%。该方法具有简便、快速、准确等优点,适用于铬污染场地的监测与调查。